Include Digital Material, Exclude Gas Fee, Exclude Equipment Rental Fee

30000฿

This Program is designed to develop wreck diving skills within the limits of light penetration and to insure that divers are aware of self-responsibility and capable of risk management in overhead environments.

Prerequisites :

- Must be qualified in IANTD Advanced Open Water Diver or equivalent. 

• 10 loged Dives

Configuration : 

Sidemount, Backmount

Program Limits:
A minimum of 100 minutes of OW bottom time. 

ALL dives must be completed in the overhead environment b. A minimum of four (4) SCUBA dives 

►  NOTE: Even if the time requirements are exceeded, a minimum of four (4) SCUBA dives must be made. 

►  NOTE: The bottom time on each dive shall not be less than 20 minutes. 

►  NOTE: At the Instructor discretion, Wreck Diver candidate who is already certified as Essentials Diver the open water dive requirements can be reduced to: 

► A minimum of two (2) Overhead Dives and 90 minutes. 

Unobstructed exit / surface light must always be visible. 

No dives may be conducted to depths greater than diver’s previous certification level. 

The Rule of Thirds must be applied from the point of entering the overhead environment until safe exit from the overhead environment portion of the dive.
All appropriate safety or required decompression stops must be performed.

Include Digital Material, Exclude Gas Fee, Exclude Equipment Rental Fee

40000฿

This Program is designed to train wreck divers in wreck penetration diving and the utilization of EANx for wreck exploration and the use of EANx and oxygen for decompression.

Prerequisites :

Option 1 - Qualified as: 

1. IANTD Wreck Diver or IANTD Cavern Diver or higher or equivalent 

2. IANTD Deep Diver or higher or equivalent 

III. Must proof a minimum of 40 logged dives with qualification as IANTD Wreck or Cavern Diver. 

b. Option 2 - Qualified as: 

1. Advanced EANx Diver or higher 

2. Must proof of a minimum of 70 logged dives. 

Configuration : 

Sidemount, Backmount

Program Limits:
a. A minimum of 240 minutes of wreck run time b. Six (6) Tek Lite Wreck dives 

• ►  NOTE: At the Instructor discretion, Tek Lite Wreck Diver candidate who is already certified as Tek Lite Essentials Diver the wreck dive requirements can be reduced to: 

• ►  A minimum of four (4) Tek Lite Wreck Dives and 220 minutes.
  Depth limit - No dives may be conducted to depths greater than 150 fsw (45 msw) for Advanced EANx Divers, 150 fsw (45 msw) for Advanced Recreational Trimix Diver or 170 fsw (51 msw) for Adv. Recreational Trimix Plus Diver or higher.
  ► NOTE: No dives may be conducted to depths greater than the qualification of the student.
  Oxygen partial pressure may not exceed 1.4 ATA during the working portion of the dives. Oxygen partial pressure may not exceed 1.5 ATA during the decompression portion of the dives. Decompression Gas mixtures: 

a. One (1) stage decompression cylinder containing oxygen PO2 no greater than 1.5 atm and appropriately labeled. 

All dives must be completed within both the IANTD oxygen CNS% and OTU limits. 

The Rule of Thirds must be applied from the point of entering the overhead environment until safe exit from the overhead environment portion of the dive. 

Include Digital Material, Exclude Gas Fee, Exclude Equipment Rental Fee

20000฿

This Program is designed to give the diver a better and deeper understanding of the models used for generating dive tables and dive computer profiles. The program will also train students to use dive tables, dive computers and decompression software programs.

Prerequisites :

- IANTD Advanced EANx Diver or higher or equivalent 

Configuration : -

Program Limits:
There are no diving activities required for this Program.

Include Digital Material, Exclude Gas Fee, Exclude Equipment Rental Fee

15000฿

This Program is designed to train competent personnel in the safe handling of oxygen and the preparation of EANx.

Prerequisites :

- Must be recommended by an IANTD Instructor or Facility. 

Configuration : -

Program Limits:
NOTE: Blenders may not perform duties other than cylinder cleaning, visual inspections and gas mixing unless qualified as a Technician with the manufacturer of the equipment being prepared for EANx use. 

This Program must include:
a. Preparation of at least 10 mixes between 3 diferent EANx mixes.
b. Each of the 10 mixes shall have a final oxygen content within ±1 % of the target amount 

Include Digital Material, Exclude Gas Fee, Exclude Equipment Rental Fee

20000฿

This Program is designed to train competent personnel in the safe handling of oxygen and the preparation of Trimix and Heliox.

Prerequisites :

- Must be recommended by an IANTD Instructor or Facility. 

Configuration : -

Program Limits:
► NOTE: Blenders may not perform duties other than cylinder cleaning, visual inspections and gas mixing unless qualified as a Technician with the manufacturer of the equipment being prepared for EANx use. 

This Program must include: 

• Preparation of at least 10 mixes between 3 diferent Trimix mixes. 

• Each of the 10 mixes shall have a final oxygen (O2) content within ±1 % of the target amount 

• Each of the 10 mixes shall have a final helium (He) content within ±3 % of the target amount
  

Include Digital Material, Exclude Gas Fee, Exclude Equipment Rental Fee

20000฿

This Program is designed to train competent personnel in the preparation and use of the O’Doppler system according to the latest manufacturer recommendations. This includes download and use of the latest Azoth O’Dive softwares, and upload and download of the individual measuring results.

Prerequisites : -  

Configuration : -

Program Limits:
This Program must include: 

a. A minimum of four (4) hours of theory covering the theory and user materials provided by the manufacturer. 

b. A minimum of two (2) complete measurements, including the upload and download of complete individual dive results. 

Include Digital Material, Exclude Gas Fee, Exclude Equipment Rental Fee

35000฿

This Program have been designed to provide qualified divers with “self-supported - self-sufficient” training. It is a course for divers who don’t rely in some circumstances on a buddy system also known as solo diving.

Prerequisites :

- IANTD Deep Diver or equivalent. 

-Proof of a minimum of 25 logged dives. 

Configuration : 

Sidemount, Backmount

Program Limits:
A minimum of 90 minutes of dive time developing water skills. b. A minimum of four (4) dives. 

►  NOTE: All open water dives shall be conducted in environments that will allow at all times a direct vertical access to the surface
►  NOTE: The instructor will be present throughout the dive. The instructor will interfere and end the dive if in any case personal safety is in danger.
►  NOTE: At the Instructor discretion, Self-Sufficient Diver candidate who is already certified as Tek Lite Essentials Diver the dive requirements can be reduced to: 

► A minimum of two (2) Open Water Dives and 60 minutes.
No training dives are made in an overhead environment, unless the student is already overhead certified No dives may be conducted to depths greater than 132 fsw (40 msw).
In “self-supported - self-sufficient” dives the gas management rule is set on 1/3 rule.
Maximum ascent rate is 30 feet (9 meters) per minute and in each dive ends with a safety stop.
The Diver is certified to dive “self-supported - self-sufficient” non-decompression dives. 

Include Digital Material, Exclude Equipment Rental Fee

40000฿

This Program is designed to train competent personnel in the safe preparation and maintenance of life support systems to be used in SCUBA diving, and with breathing gases other than air. This includes service, maintenance and visual inspection procedures.

Prerequisites :

- Must be qualified in IANTD EANx Blender or equivalent. 

- Must be recommended by an IANTD Instructor or Facility.
- Provide proof of Technician status through manufacturers that the Technician will be servicing equipment or qualification through the Institute of American Scuba Technicians (IAST). 

Configuration : -

Program Limits:
- A minimum of four (3) hours of hands on experience doing VIPs
- A minimum of four (4) hours of servicing equipment for use with breathing gases other than air.